Welome to the Di-log Press Box, we will continue to bring you new and exciting news from the Test Equipment Industry.
July 2011
NEW DIVISION LAUNCH!
Welcome to Di-log Solar, the new “Greener” member of the Di-log Group.
Test equipment is a huge part of a typical PV installation. All installers require the ability to measure Irradiance levels, in either W/m2 or BTU/ft*h. Plus, voltage and current measurement, either by clamp meter or multimeter.
The new range will start with a very high spec Irradiance Solar Meter, the SL102 and a PV Installation kit, the SL300.
The SL102, with its unique dual display, gives the installer the ability to accurately measure Irradiance, and the facility to connect directly to the panel’s terminal to measure Voltage (VOC). With the supplied MC4 test leads plugged in to the SL102, you can safely test the panel in situ whilst measuring the Irradiance levels before fitting the panel on the roof.
The SL300, includes the SL102 and incorporates the Di-log DL6402, our biggest selling DC current clamp meter. The kit is supplied in a soft carry case, making portable and easy to take on site.
Please visit the link below for more information on the range.....So far!!
May 2011
NEW PRODUCT LAUNCH!
Di-log are pleased to announce the launch of our new DL1601 - R2 Socket Adaptor.
This simple device simpley plugs in to a 13A socket and enables, quick, easy and safe testing of R2 and R1+R2 without removing the socket from the wall. Simple!
February 2011
See our Independant Electricians review of the Di-log CombiVolt II
November 2010
Re-cal Calibration, part of the Di-log Group on site with Di-log Test Equipment at an electrical wholesalers in the New Forest. Please click the link above to read our report on on-site calibration and the highlighted danger of replacing full calibration with check boxes.
September 2010
Di-log launch the All New Seaward PATBags. The ultimate PAT Testing starter kit from Seaward Electronic. Available with or without PATGuard Elemants, manual data entry PAT software, the PATBag comprises of everything that is needed to carry out basic PAT testing requirements where results will be recorded manually.
Please click on thelink below to view the NEW range:
July 2010
Di-log Launch a New Range of proving unit kits to help you comply with the HSE GS38
